Home › Concrete Cost Guide

How Much Does Concrete Cost in Statesboro, Swainsboro & Metter, GA? (2026 Guide)

Typical prices for concrete driveways, slabs, patios, sidewalks and commercial concrete in Southeast Georgia, and the factors that push a job up or down.

Call (912) 314-9891Free estimates · Statesboro · Swainsboro · Metter

The short answer

Quick answer: Most plain, broom-finished residential concrete in the Statesboro area falls roughly in the $6 to $12 per square foot range installed. Thicker slabs with rebar, tear-out of old concrete, difficult access and decorative finishes push the price higher. Small jobs often carry a minimum charge. For an exact number, call South GA Concrete Pros at (912) 314-9891 for a free on-site estimate.

Nobody can give you an honest price on concrete over the phone without seeing the site, because most of the cost difference between two jobs of the same size is in the ground, not the concrete. This guide explains what goes into a concrete price in Bulloch, Emanuel and Candler counties so you know what to expect and can compare estimates fairly.

Typical concrete prices by project

ProjectTypical installed cost per sq ftWhat moves the price
Concrete driveway (4 in., broom finish)$6 – $12Thickness, base prep, tear-out, access, apron
Heavy-duty driveway or RV pad (5–6 in. with rebar)$8 – $15Extra concrete and steel, thickened edges
Patio, sidewalk or porch slab$6 – $14Shape, steps, finish, access to the back yard
Shed, AC or generator pad (small)Often a minimum job chargeSmall pours have fixed truck and setup costs
Shop, garage or pole barn slab (4–6 in.)$6 – $12Thickness, rebar, footings, anchor bolts
Stamped or decorative concrete$12 – $20+Pattern, color, sealer, detail work
Old concrete removal and haul-off$2 – $6 addedThickness, steel in the old slab, disposal
Commercial parking area (5–6 in.)$8 – $16Thickness, grading, drainage, curb and joints

These are typical ranges for planning only, based on published 2026 national and regional cost data. Prices in Southeast Georgia change with ready-mix and fuel costs. Your actual price comes from an on-site estimate.

Example: what a two-car driveway might cost

A common two-car driveway is about 20 feet wide by 30 feet long, or 600 square feet. At 4 inches thick that is roughly 7.4 cubic yards of concrete, and most contractors order a little extra. At $6 to $12 per square foot installed, a plain broom-finished driveway of that size would typically land somewhere around $3,600 to $7,200 before tear-out of an old driveway or unusual site work. If you park a heavy truck or trailer on it and go to 5 or 6 inches with rebar, expect the higher end or above.

Use this as a ballpark only. The concrete driveways page explains thickness and reinforcement in more detail.

What drives the cost of concrete

1. Size and thickness

Concrete is ordered by the cubic yard, so square footage and depth set the starting point. A 6 inch slab uses 50 percent more concrete than a 4 inch slab of the same size.

2. Site prep and base

Flat, open, cleared ground is the cheapest to pour on. Slopes, soft spots, fill dirt, stumps and roots all add excavation, base material and compaction. In Southeast Georgia's sandy loam over clay, base prep is where a good contractor earns their money.

3. Tear-out and haul-off

Breaking out old concrete takes equipment and labor, and the debris has to be hauled and disposed of. Old slabs with heavy steel or extra thickness cost more to remove.

4. Reinforcement

Wire mesh, fiber and rebar each cost different amounts. Rebar grids and thickened edges add cost but are the right choice under trucks, RVs and equipment.

5. Access

If the ready-mix truck can back up to the forms, the pour is simple. If the slab is behind a house, fence or septic field, a concrete pump or buggies are needed, which adds cost.

6. Finish

Broom finish is the standard and most economical. Smooth trowel, exposed aggregate, color and stamped patterns each add labor and material.

7. Small-job minimums

A 4 by 4 foot AC pad still needs a truck, a crew and setup time. That is why small pours usually carry a minimum charge, and why combining small jobs saves money.

8. Permits and right-of-way work

Driveway aprons and culverts that tie into a city, county or state road can require a permit and specific details, which can add cost and time.

How to save money on concrete

  • Combine jobs. Pour the driveway, walk and patio on the same day to spread out truck and setup costs.
  • Clear the area first. Moving vehicles, furniture, plants and debris before we arrive saves labor.
  • Choose the right thickness. Do not overbuild a walkway, and do not underbuild a truck pad. Matching thickness to use is the best value.
  • Stick with a broom finish where looks are not the priority. It is the most slip-resistant and the least expensive.
  • Plan for the long term. Cutting corners on base and joints is the most expensive mistake, because the slab has to be torn out and redone.

Comparing concrete estimates

Two estimates for the same driveway can be thousands apart because they are not quoting the same job. When you compare, check that each estimate states:

  • Square footage and thickness
  • Base preparation and compaction
  • Reinforcement type (fiber, wire or rebar)
  • Control joint spacing
  • Tear-out and haul-off of old concrete
  • Finish type
  • Who handles any permit or apron work

Our written estimates spell all of this out so you know exactly what you are paying for.

Get an exact price

We give free on-site estimates in Statesboro, Swainsboro, Metter and the surrounding towns. Call (912) 314-9891 or use the contact page. See also slabs and pads, sidewalks and patios, repair and replacement and commercial concrete.

Concrete cost FAQ

How much does a concrete driveway cost in Statesboro, GA?

A plain 4 inch broom-finished driveway typically runs about $6 to $12 per square foot installed, so a 600 square foot two-car driveway often lands around $3,600 to $7,200 before tear-out or extra site work. A free on-site estimate gives the exact price.

How much does a 20x20 concrete slab cost?

A 20 by 20 slab is 400 square feet. At about $6 to $12 per square foot installed, it typically costs around $2,400 to $4,800 at 4 inches thick, more if it is thicker, reinforced with rebar or needs significant site prep.

How much does it cost to remove old concrete?

Tear-out and haul-off typically adds about $2 to $6 per square foot, depending on thickness, steel in the old slab and disposal.

Is there a minimum charge for small concrete jobs?

Usually, yes. Small pads still need a truck, crew and setup, so small jobs often carry a minimum. Combining several small pours into one visit saves money.

Is concrete cheaper than asphalt?

Asphalt is usually cheaper up front. Concrete typically costs more to install but lasts longer and needs less maintenance, especially in South Georgia heat.

Why are concrete quotes so different?

Quotes differ when they cover different thickness, base prep, reinforcement, tear-out and finish. Compare estimates line by line.

Do you give free estimates?

Yes. South GA Concrete Pros gives free on-site estimates across Statesboro, Swainsboro, Metter and the surrounding area. Call (912) 314-9891.

Want an exact price for your project?

Call now for a free on-site estimate.

Call (912) 314-9891
Tap to Call (912) 314-9891